Events -> On Idle

Mode

Field	Description	Default
Logic mode	If set to `Or` then the first enabled detection method to pass the threshold will cause the session to be classed as idle. If set to `And` then all of the enabled detection methods must pass the threshold to cause the session to be classed as idle.	`Or`

Field

Description

Default

Logic mode

If set to Or then the first enabled detection method to pass the threshold will cause the session to be classed as idle.

If set to And then all of the enabled detection methods must pass the threshold to cause the session to be classed as idle.

Or

CPU-base detection

CPU-based detection checks to see if the workstation is below the specified threshold for the defined inactivity period. When this happens, the session is considered idle, and a logout warning will be sent to the user.

Field	Description	Default
Enable	If checked, then the detection method is enabled.	`Enabled`
CPU utilisation threshold	If the user's CPU utilisation is below this threshold for the length of the inactivity period, then the session is considered idle.	`5%`
Inactivity period	The amount of time the CPU needs to be below the idle threshold before the session is classified as idle.	`1 minutes`

Field

Description

Default

Enable

If checked, then the detection method is enabled.

Enabled

CPU utilisation threshold

If the user's CPU utilisation is below this threshold for the length of the inactivity period, then the session is considered idle.

5%

Inactivity period

The amount of time the CPU needs to be below the idle threshold before the session is classified as idle.

1 minutes

Input-base detection

Input-based detection checks to see when the last user input with the workstation occurred. This input could be either keyboard, mouse or other pointed device input. When this happens, the session is considered idle and a logout warning will be sent to the user.

Field	Description	Default
Enable	If checked, then detection method is enabled.	`Enabled`
Inactivity period	The amount of time a user needs to be in an inactive state for before the session is classified as idle.	`10 minutes`

Field

Description

Default

Enable

If checked, then detection method is enabled.

Enabled

Inactivity period

The amount of time a user needs to be in an inactive state for before the session is classified as idle.

10 minutes

Notify user

When a session has been classed as idle, a message will be sent to the workstation warning them that they will be logged off.

Field	Description	Default
When to show message	This is the amount of time that a message will be displayed to a user before they are logged out. If this is set to `00:00:00` then no message will be shown.	`2 minutes`
Message	The message to display to users before they are logged out. If this field is blank, then the default message will be displayed.

Field

Description

Default

When to show message

This is the amount of time that a message will be displayed to a user before they are logged out.

If this is set to 00:00:00 then no message will be shown.

2 minutes

Message

The message to display to users before they are logged out. If this field is blank, then the default message will be displayed.